SYNERGY FOR THE NEXTReading signals, timing the exact moment

Products in the system

What SYNEX devices do
inside a machine-vision inspection system

Scroll to light up what each device does in three scenarios.

SYNEX products in a machine-vision inspection system ② PCB entry checkLow-speed 10 PPR × 10003D check at PCB entryAnalog linear scaleX-axis linear stage① Line & area-scan trigger controlAnalog → digital interp.Position-interval triggerFrame grabberCamera capture (generic)Inspection · control③ Abnormal vibration3 spots · alarm lampGantry · alarmLine-scan camera · lightingLow-speed encoder10 PPR (10 pulses/rev)Base top · PC report + alarmConveyor rail · alarm EasyLink · Encoder Multiplier · DividerEasyFind · 3D SensorEasyCounter · Encoder InterpolatorEasyTrigger · Encoder Position TriggerEasySense · AI Vibration Sensor
  1. 01

    Line & area-scan camera trigger control

    EasyCounter interpolates the analog linear-scale signal to digital, and EasyTrigger fires the line-scan camera and lighting at every position interval.

    EasyCounter EasyTrigger

  2. 02

    PCB entry check

    EasyLink multiplies the low-speed encoder (10 PPR) signal for the PC, while EasyFind measures the PCB entry in 3D.

    EasyLink EasyFind

  3. 03

    Abnormal machine vibration

    EasySense units on the gantry, base and conveyor rail learn normal vibration and report anomalies to an alarm lamp and the PC.

    EasySense

01

Real-time

High-speed, high-precision real-time signal processing

FPGA-based hardware processing for nanosecond-level, high-precision timing control

02

Precision

Digital & analog signal processing

Counting, dividing and multiplying pulses at tens of MHz, plus high-resolution interpolation of analog signals

03

3D Sensing

3D spatial sensing

Judges distance and height from measured 3D data, with signal processing robust to color and gloss

04

Edge AI

Edge AI signal analysis

Learns signal patterns of on-site equipment inside the device — no external server — and detects subtle changes on site

Problem → Solution

Common problems on the floor —
what do you need to solve?

Work with us

Let’s check if it fits your machine

Tell us your machine setup and signal specs — we’ll start by reviewing whether it applies.

  1. 01

    Inquiry

    Send your machine setup and required functions

  2. 02

    Consultation

    Review encoder, camera and interface specs; propose product and model

  3. 03

    Demo · Evaluation

    Verify operation under real machine conditions

  4. 04

    Training

    Training on product use and configuration

  5. 05

    Support

    Post-installation support and configuration changes

Tell us your setup and signal specs

We’ll start by reviewing whether it applies.