Home/Products/Vibration Sensor/EasySense
EDGE AI VIBRATION SENSOR
EasySense
AI Vibration Sensor NEW Coming soon
Learns the normal vibration of your machine and alerts you when it deviates.
This product is coming soon. Specifications are development targets and may change.

THE PROBLEM
Conventional vibration sensors need an alarm threshold set per machine and miss subtle changes.
HOW SYNEX SOLVES IT
The sensor learns each machine’s normal state and detects changes right on site.
Key features
Learns on site
Learns the normal state of the installed machine — no prior data or cloud needed.
Machine-specific baseline
Judges against each machine’s own normal state, reducing false alarms.
Decides in the sensor
Analysis and decisions happen inside the sensor. No PC or server required.
Direct PLC connection
Sends results and vibration values via Modbus RTU (RS-485), plus a judgement output.
Detects typical fault signatures
Unbalance, misalignment, looseness, bearing and gear damage — typical faults in ISO 13373 vibration diagnostics.
ISO vibration grade
Check ISO 10816 vibration grade with velocity RMS (mm/s).

Software
Software
Monitor software — vibration trend and status (example)
How it works
Comparison — what’s different
| Conventional sensor | Cloud AI | EasySense | |
|---|---|---|---|
| Baseline | Fixed threshold | Server model | Machine’s normal state |
| Prior data | Not needed | Needed | Not needed |
| PC / server | Not needed | Needed | Not needed |
| Data leaves site | No | Yes | No |
| Learns after install | – | – | ✓ On-site |
Screw it to the machine and connect to the PLC.
The sensor learns vibration during normal operation.
Judges Normal / Warning / Alarm and outputs the result.
Specifications
| Measurement | 3-axis vibration, temperature |
|---|---|
| Bandwidth | ~5 kHz |
| Vibration index | Velocity RMS (mm/s), ISO 10816 |
| AI decision | On-site learning, in-sensor decision (Normal / Warning / Alarm) |
| Interface | Modbus RTU (RS-485) |
| Output | Judgement output (Normal / Warning / Alarm) |
| Mounting | Screw mount, M12 connector |
※ Specifications are subject to change without notice. Contact us for detailed specifications.
Applications
Industry
Semiconductor · Precision equipment · Plant facilitiesUse cases
- Monitoring vibration changes on precision semiconductor equipment
- Predictive maintenance for motors, pumps, fans and spindles
Let’s check if it fits your machine
Tell us your machine setup and signal specs — we’ll start by reviewing whether it applies.


