Home/Products/Encoder Signal Processing/EasyTrigger
ENCODER POSITION TRIGGER CONTROLLER
EasyTrigger
Encoder Position Trigger
Outputs trigger signals to line-scan cameras and lighting, synchronized to encoder position.

THE PROBLEM
When conveyor speed changes, time-based capture produces uneven image spacing.
HOW SYNEX SOLVES IT
Triggers cameras and lighting by encoder position, so images stay evenly spaced at any speed.
Key features
Position-based trigger
Set start, end and interval in encoder counts. Independent interval per channel.
Per-channel delay, width, polarity
Delay 0–6.5 ms, width 200 ns–6.5 ms (100 ns steps), Active High/Low.
Virtual trigger
Generate real triggers from a virtual encoder (0.1 Hz–40 MHz).
Versatile outputs
Differential, LVDS, TTL and open-drain outputs on every channel simultaneously.
Trigger integrity monitoring
Verifies its own output count and flags errors on over-speed or position overrun.
Easy setup
Dedicated GUI or ASCII commands. Settings are stored and restored at power-up.

Software
Software
Configuration software — per-channel parameter settings
How it works
Encoder position
Specifications
| Encoder input | A/B/Z differential, up to 20 MHz (×4), analog option |
|---|---|
| Channels | 2 / 4 / 8 (by model) |
| Trigger output | Diff · LVDS · TTL · Open-drain (by model) |
| Delay / width | Delay 0 – 6.5 ms, width 200 ns – 6.5 ms |
| Virtual trigger | Virtual encoder 0.1 Hz – 40 MHz (0.1 Hz steps) |
| Interface | RS-232, 115200 bps, ASCII commands |
| Power | 12–24 VDC, 0.5 A @ 24 VDC |
| Size / weight | 160 × 83 × 40 mm · 500 g |
※ Specifications are subject to change without notice. Contact us for detailed specifications.
Applications
Industry
Semiconductor · Display · BatteryUse cases
- Line-scan capture at each stage position in wafer/panel inspection
- Electrode roll-to-roll surface inspection with synchronized multi-camera capture
Let’s check if it fits your machine
Tell us your machine setup and signal specs — we’ll start by reviewing whether it applies.



